Windows 95 Version 4.00.950A; Windows Nt - 3Com LAN User Manual

12

Windows 95 Version 4.00.950A

Windows NT

Downloaded from www.Manualslib.com
C 2: I
HAPTER NSTALLING THE
This section describes how to install the NDIS network driver
when your notebook is running Windows 95 4.00.950A.
1 Make sure the PC Card is installed and connected to
the network, as described in Chapter 1.
The New Hardware Found window appears and states that
it has detected the 3Com Megahertz LAN PC Card (589E)
(Ethernet).
2 Insert LAN Installation Disk 1.
3 Select Driver from Disk provided by manufacturer
and click OK.
The Install from Disk window appears.
4 Click OK to copy the manufacturers files from a:\.
If Windows 95 files are requested, enter the path to the
files (typically C:\windows\options\cabs)and click OK.
5 Remove the LAN Installation Disk 1 and restart the PC
to log into the network.
Before you begin, obtain LAN Installation Disk 1 shipped
with your LAN PC Card and the Windows NT installation
files (on hard disk or CD).
If Windows NT networking is not installed, you also need
the following information from your MIS department.
Are you on a local area network or are you using a
modem?
Protocol used in the Microsoft Windows network
(NWLink IPX/SPX compatible transport, TCP/IP protocol,
NetBEUI protocol)
Name of the NT Server domain or workgroup you
belong to
IP address if you are not using DHCP
The 3Com software automatically detects which version of
Windows NT your are running and installs the correct driver.
manuals search engine
N D
ETWORK RIVER