Installing The Windows Ce 2.0 Driver - 3Com LAN User Manual

20

Installing the Windows CE 2.0 Driver

Downloaded from www.Manualslib.com
C 2: I
HAPTER NSTALLING THE
5 Press Enter.
An Operating System selection screen appears.
6 Select AutoLink for DOS, Windows 3.x, or WFW 3.11.
Several messages appear while the AutoLink program is
running. A final message indicates successful installation.
If problems occur only when the AutoLink program runs,
view or print the AUTOLINK.LOG file (located in the C:\
directory) to see problems listed in the file.
To display the file, type:
type autolink.log | more [Enter]
To print the file, type:
print autolink.log [Enter]
7 When prompted, remove LAN Installation Disk 2 and
reboot the PC.
When prompted, type your user name and password.
The following Windows CE hand-held PCs support the LAN
PC Card using the United States Windows CE 2.0 driver:
Cassiopeia Model # A11 & A20 (SH3 CPU)
LG Phenom (SH3 CPU)
Sharp Mobilon Model # HC4100 (MIPS CPU)
Phillips Velo Model # 500 (MIPS CPU)
Compaq C-Series (MIPS CPU)
NEC MobilePRO 750C (MIPS CPU)
To install the driver, see the WINCE.TXT file on LAN
Installation Disk 1 in the WIN_CE directory.
manuals search engine
N D
ETWORK RIVER