Group Operation And Total Operation; Search For Indoor Unit - LG PQCSC101S0 Owners & Installation Manual

During Use

Group Operation and Total Operation

This function is used to control the indoor unit connected in form of group or whole or search for the indoor unit
displayed on the function controller display window.
1
Select Group or Whole Indoor Unit from the central controller.
2
The function controller displays "Total On" and operation status of the first indoor unit connected.
*Note : "Total On" segment in the Function controller means that whole indoors are executed by same
command so, "Total On" segment would be displayed not only total on operation but also total off
operation.
3
You can control indoor unit function in form of group or whole by entering the function controller's
button.

Search for Indoor Unit

1
Press Search Button of the function controller.
2
The operation/stop status display of the relevant indoor unit on the central controller flickers for 5
seconds and displays that function control is being performed
20 Function Control Unit