Cleaning The Toner Density Sensor - Kyocera FS-C1020MFP+ Operation Manual

10. Maintenance

Cleaning the Toner Density Sensor

Clean the machine when the error message instructing you to do so appears.
This procedure explains how to clean the toner density sensor of the yellow print cartridge as an
example of how to clean a sensor.
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
1. Pull up the lever on the top cover, and then carefully raise the top cover.
Make sure that the ADF is closed.
2. Lift out the rearmost print cartridge.
398
CES138
CES086