Table of Contents
Advertisement
7. Configuring the Machine Using the Control Panel
Copy Setting Parameters
This section describes the copy setting parameters.
Select Paper
Specifies the paper size used for printing copies.
When a tray is selected, the machine prints from that tray only.
When a paper size is selected, the machine prints from the trays that contain the paper of the
specified size, except the bypass tray. If tray 1 and tray 2 both contain the paper of the specified
size, the machine starts to print from the tray specified as the priority tray in [Paper Tray Priority]
under system settings. If that tray runs out of paper, the machine automatically switches to the other
tray to continue printing.
If tray 2 is not installed, only [Tray 1] and [Bypass Tray] appear.
Default: [Tray 1]
• Tray 1
• Tray 2
• Bypass Tray
• A4
• 8 1/2 × 11
Sort
Configures the machine to sort the output pages into sets when making multiple copies of a multi-
page document (P1, P2, P1, P2...).
Default: [Off]
• On
• Off
Original Type
Specifies the content of originals, to optimize copy quality.
Default: [Mixed]
• Text
Select this when the original contains only text and no photographs or pictures.
• Photo
Select this when the original contains photographs or pictures. Use this mode for the following
types of original:
• Photographs
• Pages that are entirely or mainly photographs or pictures, such as magazine pages.
• Mixed
246
Hide quick links:
Advertisement
Table of Contents
