Disassembling The Loading Base Unit; Checking The Module C.b.a; Disassembling The Rear Panel - Yamaha DVD-S795 Service Manual

7. Disassembling the Loading
Base Unit
1. Remove the 4 screws.
2. Pull out the loading base unit vertically.
Note
There is a danger of damaging the connectors.
Screw
Connector

8. Checking the Module C.B.A.

1. Remove the 2 screws.
Module C.B.A.
PS4201
Screw
2. Connect the module C.B.A. to the mother C.B.A. with the
Mother C.B.A.
Loading Base Unit
Screw
1. Remove all of the screws connected to the rear panel.
PS3201
2. Release the two tabs on the left and right.
2 - 4
extension cables for inspection.
•Extension cables: TX946370 (JGS0098)
Mother C.B.A. Module C.B.A.
PP4201-PS4201
PP3201-PS3201
PP4201
PP3201
Note
Be sure to initialize the player whenever you replace a
C.B.A. (Refer to section 1-9, Initializing the DVD Player.)

9. Disassembling the Rear Panel

(The number of screws varies according to the model).
Screw
Screw
Screw
PS4201
PS3201
Screw