Table of Contents
Advertisement
Display
"RX MEMORY FULL"
"SCANNER POSITION ERROR"
"TONER EMPTY"
"CHANGE SUPPLIES"
"TONER LOW"
"CHANGE SUPPLIES"
"TRANSMIT ERROR"
"TRAY #2 LEFT COVER
OPEN"
"WARMING UP"
Cause & Solution
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 13) or remove the jammed
paper (page 89).
L If the PC fax setting (feature #442 on page 62) is set to "ALWAYS",
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L If the fax preview mode (feature #448 on page 53) is set to "ON",
– view, print or save the received fax documents, and then erase the
unnecessary documents (page 53).
– turn the setting to "OFF". The fax documents stored in memory will be
printed automatically.
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The toner is empty. Replace the toner cartridge immediately.
L The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.
L A transmission error occurred. Try again.
L The left cover of the lower input tray is open (page 74). Close it.
L The inside of the unit is cold. Let the unit warm up. Wait for a while.
10. Help
79
Hide quick links:
Advertisement
Table of Contents
