Table of Contents
Advertisement
Connections and Setup
3 Preparation
3.1 Connections
Caution:
L The power cord must remain connected at all
times (for UK only).
L Never install telephone wiring during a lightning
storm (for UK only).
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord supplied
with this unit.
L Do not extend the telephone line cord.
9
3
5
6
4
1 Power cord
L Connect to a power outlet
(220–240 V, 50 Hz).
2 Telephone line cord
L Connect to a single telephone line socket.
3 [EXT] socket
L You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L Also connect networked computers.
7 LAN cable (not supplied)
L To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
7
1
2
IMPORTANT NOTICE FOR THE USB
CONNECTION
L DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 25).
Note:
L Do not place any objects within the following
distance:
– Left side (8): 40 cm
– Right side (9) and back side (j): 10 cm
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter (k), please
connect it as follows.
8
j
Connector pinouts (for Germany only)
Socket "To phone line"
1 a2
2 —
3 La
4 Lb
5 —
6 b2
L A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
Designed to be used in the United Kingdom and
Ireland, Germany, Spain and Portugal according
to the location setting feature.
The default setting is UK. To change the location
setting, see page 55 (feature #114).
3. Preparation
k
3
4
2
5
1
6
17
Hide quick links:
Advertisement
Table of Contents
