Ironing - Miele MM 50-175 Operating Instructions Manual

Ironing

^ Switch on the electricity supply to the
machine.
^ On rotary ironers without an integrated
compressor: open the on-site compressed
air stopcock.
^ Press s to switch the machine on.
^ Turn the temperature selector p
anti-clockwise to the lowest setting.
^ Presss the Start h button.
The ! Heating indicator light comes on
and the heater plate heats up. The °C
display shows the current temperature of
the heater plate.
^ When the ! heating indicator light has
gone out, press the Start h button again.
The heater plate moves up to the roller and
the roller starts turning.
12
^ Use the temperature selector p to select
the temperature according to the type of
fabric.
Material
Perlon/artificial silk
Silk/wool
Cottons/linen
^ Use the speed selector to select the m/min
speed of the roller.
,
Check that the finger guard is
functioning properly.
^ Start ironing by feeding laundry in from the
feed-in table, making sure it lies flat across
the feed-in belts as it goes in.
^ Smooth items from the middle outwards
towards the edges.
^ Do not restrict ironing of smaller articles to
any one part of the roller. Make use of the
whole roller width.
Temperature °C
approx 100
approx 150
approx 180 -200
M.-Nr. 05 567 240 /03