Table of Contents
Advertisement
Recording
Tally Light
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
4
3
2. Press
or
on the mode select dial
to highlight Tally.
Tally
Interval Timer
Rec Time
JLIP ID NO.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
4
3
2. Press
or
on the mode select dial
to highlight JLIP ID NO.
Tally
Interval Timer
Rec Time
JLIP ID NO.
ON
OFF
OFF
0 7
ON
OFF
OFF
0 7
6
3. Press
on the mode select dial to start
Tally flashing.
4
3
4. Press
or
on the mode select dial
to turn the tally light ON or OFF.
• Select ON to have the tally light
turn on during recording.
• Select OFF if you do not want the
tally light to light.
5
5. Press
to stop Tally flashing.
6. Press MENU to exit the menu.
6
3. Press
on the mode select dial to start
JLIP ID NO. flashing.
4
3
4. Press
or
on the mode select dial
to a number from 01 to 99.
5
5. Press
to stop JLIP ID NO. flashing.
6. Press MENU to exit the menu.
55
Hide quick links:
Advertisement
Table of Contents
