Quick Recordfeature; Quick Reviewfeature; Tally Light; Cameraedit Feature - RCA CC6351 User Manual

Quick Record Feature
The quick record feature allows you to
record for five seconds providing short
scene transitions.
1. Set POWER switch to CAMERA.
2. Press QUICK REC to display/I_5S in
the viewfinder or on the LCD monitor.
3. Press the thumb trigger to start
recording. The camcorder records for
five seconds and enters record-pause.
To Turfi Off the Quick Record Mode
1. Press the QUICK REC button to
remove "IB5S from the viewfinder or
LCD monitor.
Camera Edit Feature
The camera edit feature allows you to
position the tape when the camcorder is in
record-pause. Set POWER switch to
CAMERA.
• Press and hold VCR 4 4
to visually search the recorded tape
in reverse.
• Press and hold VCR _ I_
to visually search forward on the
recorded tape.
Release the button to return the cam-
corder to record-pause at that point on the
tape. Press the thumb trigger to start
recording at this point.
Quick Review Feature
Press and release VCR • • when the
camcorder is in record-pause to review
the last few seconds of a recording. The
POWER switch must be set to CAMERA.
The camcorder plays back the last few
seconds of the recording, returns the tape
to its previous position, and returns to
record-pause.
Tally Light
The tally light lights when the camcorder
is recording. The tally light flashes during
self-timer and time-lapse recording.
The tally light must be set to ON in the
TALLY LAMP menu. See page 54for
details.
Flying Erase Head
A separate erase head is mounted on
the spinning headwheel (hence the term
"flying"). This allows you to make clean
edits without the "glitches" or "rainbow
noise" that might occur at the beginning
or the end of recordings.
Auto Head Cleaner
The camcorder has an automatic head-
cleaning system. Whenever you insert
or remove a cassette, this system
is activated.
The head-cleaning system minimizes the
need for accessory cleaners or cleaning
by a Service Center.
33