IOGear MiniView Ultra+ GCS1758 User Manual page 37

OSD Operation
F4 ADM:
F4 is an Administrator only function. It
allows the Administrator to configure and
control the overall operation of the OSD. To
change a setting Double Click it; or use the
Up and Down Arrow Keys to move the
highlight bar to it then press [Enter].
After you select an item, a submenu with
further choices for you to select from
appears. Double Click the choice you want,
or move the Highlight Bar to it then press
[Enter]. An icon appears before the
selected choice so that you know which
one it is. The settings are explained in the
following table:
34