IOGear MiniView Ultra+ GCS1758 User Manual page 15

4. Repeat steps 2 - 3 for any other computers you
are connecting up.
5. Plug the power adapter cable into the switch's
Power Jack, then plug the power adapter into an
AC power source. This completes the single stage
installation, and you can turn on the power to the
computers.
Two Stage Installation
To control even more computers, you can connect
up to eight additional GCS1758 units cascading to
the CPU ports of the first stage unit. As many as 64
computers can be controlled in a complete two
stage installation.
12
Installation