IOGear MiniView GCS1742 User Manual page 10

Introduction
KVM:
• Lights DIM ORANGE to indicate that the
computer attached to the corresponding port is
up and running (On Line).
• Changes to BRIGHT ORANGE to indicate that
the computer attached to its corresponding port
is the one that has the KVM focus (Selected).
• Flashes to indicate that the computer attached to
its corresponding port is being accessed under
Auto Scan mode.
USB:
• Lights DIM GREEN to indicate that there is a USB
cable connection to the computer. Does not light if
there is no USB connection to the computer (see
the installation diagram on p. 10).
• Changes to BRIGHT GREEN to indicate that the
computer attached to its corresponding port is the
one that has access to the USB peripherals.
3. USB Port
Connect one USB peripheral (printer, scanner,
etc.) here to share with your computer in your
KVM setup.
10