Enabling And Disabling Parksense - Jeep 2014 Grand Cherokee SRT8 Owner's Manual

Front Park Assist Audible Alerts
ParkSense® will turn off the Front Park Assist audible
alert (chime) after approximately 3 seconds when an
obstacle has been detected, the vehicle is stationary, and
brake pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be selected
from the EVIC or Uconnect® System — if equipped.
If Uconnect® System is equipped, chime volume settings
will not be accessible from the EVIC.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state
through ignition cycles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch.
When the ParkSense® switch is pressed to
disable the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Elec-
tronic Vehicle Information Center (EVIC)" in "Under-
standing Your Instrument Panel" for further information.
When the shift lever is moved to REVERSE and the
system is disabled, the EVIC will display the
"PARKSENSE OFF" message for as long as the vehicle is
in REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or requires service. The
ParkSense® switch LED will be OFF when the system is
enabled. If the ParkSense® switch is pressed, and the
3