To Set A Desired Acc Speed; To Cancel - Jeep 2014 Grand Cherokee SRT8 Owner's Manual

WARNING! (Continued)
want. You could lose control and have a collision.
Always leave the system off when you are not using
it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired, push the SET
+ button and release. The EVIC will display the set speed.
Remove your foot from the accelerator pedal. If you do
not, the vehicle may continue to accelerate beyond the set
speed. If this occurs:
• The message "ACC DRIVER OVERRIDE" will display
in the EVIC.
• The system will not be controlling the distance be-
tween your vehicle and the vehicle ahead. The vehicle
speed will only be determined by the position of the
accelerator pedal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201
When you remove your foot from the accelerator pedal ;
the vehicle speed will go back to the set speed, or to the
speed of the target vehicle whose speed is less than the
set speed.

To Cancel

The following conditions cancel the system:
• The brake pedal is applied.
• You depress the brake pedal.
• You press the CANCEL switch.
• An Anti-Lock Brake System (ABS) event occurs.
• A Trailer Sway Control (TSC) event occurs.
• The transmission is shifted into NEUTRAL.
• The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
3