Table of Contents
Advertisement
38
DX-24E310NA15
• Aspect Ratio—Adjusts how the picture fills the
screen.
Aspect ratio option
Normal:
Original aspect ratio is preserved. Black
bars are present if content is not
widescreen (16:9).
Zoom:
Expands the image to fill the screen. The
top and bottom of the image may be
cropped.
Wide:
Use this option to view content recorded
in a 16:9 (wide-screen) aspect ratio.
Cinema:
Stretches the image at the edges, but
keeps a clear image in the center.
Auto:
The picture display is adjusted to the
correct aspect ratio automatically (TV
mode only). This setting is only active
when Auto Zoom in the Channels
menu is set to On.
Note
You can also press ASPECT to select the
aspect ratio.
• Noise Reduction—Selects the noise reduction
mode to reduce picture noise (snow). You can
select Low, Middle, Strong, or Off.
• Overscan—When on, text and images extend
past the screen edges to hide edge artifacts.
You can select On or Off.
• Adaptive Contrast—Automatically adjusts
picture detail and brightness. You can select
On or Off.
• DCR (Dynamic Backlight)—Enhances the
contrast ratio between light and dark areas of
the picture. You can select Off, Low, or High.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
or
to adjust the option, or press
select a setting.
5 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Example
or
to
www.dynexproducts.com
Automatically adjusting the aspect ratio
You can set the picture mode your TV uses when you
turn it on.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Channels, then press
ENTER. The Channels menu opens.
3 Press
or
to select Auto Zoom.
4 Press
or
to select On (automatically adjusts the
aspect ratio) or Off (does not automatically adjust
the aspect ratio).
5 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Dynex 24" LED TV
or
Advertisement
Table of Contents
