CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
DX-32D310NA15 Important Safety Instructions 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects CAUTION have fallen into the apparatus, the apparatus has...
DX-32D310NA15 Power source Note to CATV system installer Operate your TV only from the type of power source Article 820 of the National Electrical Code, ANSI/NFPA indicated on the marking label. If you are not sure of the No. 40 provides guidance for correct grounding.
Dynex 32" LED TV Introduction Congratulations on your purchase of a high-quality Dynex product. Your DX-32D310NA15 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall mount bracket Notes •...
Page 9
Dynex 32" LED TV DX-32D310NA15 2 Attach the stand column using the four provided M4 (16 mm) screws. These are the longer screws. Screw type Screw length # of screws 16 mm 3 Secure the TV stand to your TV with the four provided M4 (12 mm) screws. These are the shorter screws.
DX-32D310NA15 Dynex 32" LED TV Installing the wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 64.) 1 Carefully place your TV face-down on a soft surface to protect the screen from damages and scratches.
Page 11
Dynex 32" LED TV DX-32D310NA15 3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.
DX-32D310NA15 Dynex 32" LED TV TV components Right side buttons Package contents • Remote control and batteries (2 AAA) • TV stand column and screws (4) • TV stand and screws (4) • QUICK SETUP GUIDE • IMPORTANT INFORMATION Front...
Dynex 32" LED TV DX-32D310NA15 Left side jacks Item Description Connect a USB flash drive to this jack to view compatible JPEG picture files. For more information, “Connecting a USB flash drive” on page “Using a USB flash drive” on page 39.
DX-32D310NA15 Dynex 32" LED TV Back Item Description Connect a digital audio amplifier or home theater system to this jack to DIGITAL listen to TV audio through the OUTPUT amplifier speakers. For more (OPTICAL) information, see “Digital audio” on page 30.
Dynex 32" LED TV DX-32D310NA15 Remote control Button Description Press to turn closed captioning on or off. You can select CC On, CC Off, or CC On When Mute. See “Turning closed captioning on or off” on page 53. Press to change how the picture looks on the screen ASPECT (aspect ratio).
DX-32D310NA15 Dynex 32" LED TV What connection should I use? Connection type and Cable connectors jack Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device Optical digital to the best available connection.
Dynex 32" LED TV DX-32D310NA15 Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I...
DX-32D310NA15 Dynex 32" LED TV DVI (same as HDMI but requires an audio connection) Notes You must use the HDMI1/DVI jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.
Dynex 32" LED TV DX-32D310NA15 Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Component Audio cable Audio cable video cable connector connectors Component video cable Component Analog video jacks...
DX-32D310NA15 Dynex 32" LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. Cable or satellite box On your TV...
Dynex 32" LED TV DX-32D310NA15 Coaxial (good) On your TV Cable or satellite box Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
DX-32D310NA15 Dynex 32" LED TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
Dynex 32" LED TV DX-32D310NA15 Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?”...
DX-32D310NA15 Dynex 32" LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV Component Audio cable Audio cable video cable connectors connectors Component video cable Component Analog video jacks...
Dynex 32" LED TV DX-32D310NA15 Composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. DVD or Blu-ray player On your TV...
DX-32D310NA15 Dynex 32" LED TV Connecting a game console HDMI (best) Side of TV Game console On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
Dynex 32" LED TV DX-32D310NA15 Component video (better) Notes • Your game console may require a special component video cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
DX-32D310NA15 Dynex 32" LED TV AV (composite video) (good) Notes • Most game consoles come with a special AV (composite video) cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
Dynex 32" LED TV DX-32D310NA15 Connecting a computer HDMI (best) Side of TV On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the computer.
DX-32D310NA15 Dynex 32" LED TV DVI (same as HDMI but requires an audio connection) Note You must use the HDMI1/DVI jack to connect a computer using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.
Dynex 32" LED TV DX-32D310NA15 VGA (good) Side of TV On your TV Audio cable VGA cable Audio cable connector connector VGA jack PC AUDIO IN jack VGA cable 1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
DX-32D310NA15 Dynex 32" LED TV Connecting a USB flash drive Side of TV USB flash drive Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive.
Dynex 32" LED TV DX-32D310NA15 Connecting headphones When you connect headphones, audio plays through the headphones and the TV speakers are muted. See “Adjusting sound settings” on page 45. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
DX-32D310NA15 Dynex 32" LED TV Connecting external speakers or a sound bar Digital audio On your TV Digital speaker system Digital optical audio cable connector Sound bar Digital optical audio jack Digital optical audio cable Back of TV 1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
Dynex 32" LED TV DX-32D310NA15 Analog audio Side of TV Analog speaker system On your TV Audio cable Sound bar Audio cable connector AUDIO OUT/ jack 1 Make sure that your TV’s power cord is unplugged and the analog speaker system or sound bar is turned off.
DX-32D310NA15 Dynex 32" LED TV Connecting a home theater system with multiple devices Blu-ray player or Cable or satellite TV box DVD player AV receiver Game console USB flash drive Antenna or cable TV connected directly to Computer the wall jack The connections you make depend on the video and audio jacks available on your devices.
Dynex 32" LED TV DX-32D310NA15 Connecting power • Plug the AC power cord into a power outlet. Notes • Your TV should only be operated from the power source indicated on the label. • Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.
DX-32D310NA15 Dynex 32" LED TV Using the remote control Turning on your TV for the first time Installing remote control batteries 1 While pressing the release latch on the back of the The first time you turn on your TV, the Setup Wizard remote control, lift the battery compartment cover opens.
Page 39
Dynex 32" LED TV DX-32D310NA15 5 If you selected Auto for Mode, press A If you are using an antenna for a standard or HD highlight Time Zone, then press to select TV signal, select Antenna. Your TV scans for your time zone.
DX-32D310NA15 Dynex 32" LED TV Understanding the basics Selecting the video input source 1 Turn on your TV. 2 If you want to use a device connected to a video Turning your TV on or off input (such as a DVD or Blu-ray player), turn on the 1 Make sure that the power cord is plugged into a device.
Dynex 32" LED TV DX-32D310NA15 Using the on-screen menus Channels menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode. • Menu items that are not selectable are grayed out.
DX-32D310NA15 Dynex 32" LED TV Selecting a channel Adjusting the volume • Press CH+ or CH– to go to the next or previous • Press VOL+ or VOL– to increase or decrease the channel on the memorized channel list. volume.
Dynex 32" LED TV DX-32D310NA15 Using a USB flash drive 3 Press to access the menu. Photos is highlighted. You can connect a USB flash drive to your TV to view compatible JPEG pictures. Notes • The JPEG picture viewer only supports JPEG format images (with “.jpg”...
DX-32D310NA15 Dynex 32" LED TV • ENTER to view a highlighted photo full screen, or 3 Press to access the menu. Photos is highlighted. open a highlighted folder. • MENU to open the USB menu. • FAV to add or remove a photo from the favorite photo list.
Dynex 32" LED TV DX-32D310NA15 Viewing photos in a slideshow 4 Press ENTER to access the menu. The photos menu opens. 1 Switch to USB mode (see “Switching to USB mode” on page 39). 2 Press MENU. The USB menu opens.
DX-32D310NA15 Dynex 32" LED TV Customizing slideshow settings 5 Press to highlight Settings, then press ENTER. The photos settings menu opens. You can customize the slideshow settings by selecting Repeat, Shuffle, Speed, and Transition settings. 1 Switch to USB mode (see “Switching to USB...
Dynex 32" LED TV DX-32D310NA15 Adjusting the picture • Contrast—Adjusts the brightness of the light areas of the picture. • Brightness—Adjusts the brightness of the dark areas of the picture. Adjusting the TV picture • Color—Adjusts the color intensity of the picture. A 1 Press MENU.
DX-32D310NA15 Dynex 32" LED TV • Aspect Ratio—Adjusts how the picture fills the Automatically adjusting the aspect ratio screen. Auto Zoom automatically changes how the picture looks on the screen (aspect ratio) based on the TV Aspect ratio option Example program you are viewing.
Dynex 32" LED TV DX-32D310NA15 Adjusting the sound Adjusting the computer image When you connect a computer to your TV using the VGA jack, you may need to adjust the computer image Adjusting sound settings to improve the quality. 1 Press MENU. The on-screen menu opens.
DX-32D310NA15 Dynex 32" LED TV • Digital Audio/SPDIF—Sends digital audio to an Playing TV audio only external audio system. You can select PCM (to You can turn off the picture on your TV and listen to the output audio in 2-channel stereo), or RAW (to pass program audio only.
Dynex 32" LED TV DX-32D310NA15 Setting parental controls 4 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to something you can Parental controls let you prevent your children from remember.
DX-32D310NA15 Dynex 32" LED TV Locking control buttons 6 Press to select On (locks the buttons) or Off (unlocks the buttons). When the button lock is turned On, the buttons on the 7 Press MENU to return to the previous menu, or press side of your TV are locked, and you can only operate EXIT to close the menu.
Dynex 32" LED TV DX-32D310NA15 5 Press to highlight System Lock. 4 Press the number buttons to enter the four-digit password. The parental controls menu opens. 6 Press to select On (turns on parental controls) or Off (turns off parental controls).
Page 54
DX-32D310NA15 Dynex 32" LED TV 1 Press MENU. The on-screen menu opens. U.S. movie (MPAA) ratings 2 Press to highlight Settings, then press . The None Movie not rated Settings menu opens with Parental Controls General audiences highlighted. Parental guidance suggested...
Dynex 32" LED TV DX-32D310NA15 5 Press to highlight US (or Canada to set Downloading rating information controls for Canada), then press ENTER. The ratings 1 Press MENU. The on-screen menu opens. screen opens. 2 Press to highlight Settings, then press . The...
DX-32D310NA15 Dynex 32" LED TV 6 To reset the RRT information to the factory default, 6 If your viewing area observes daylight savings time, press to highlight Reset RRT, then press press to highlight Daylight Savings, then ENTER. A box opens. Follow the on-screen press to select On or Off.
Dynex 32" LED TV DX-32D310NA15 Using closed captioning Selecting the analog closed captioning mode Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text Closed captioning displays a text version of the TV version of the TV program audio in a small banner.
DX-32D310NA15 Dynex 32" LED TV Selecting the digital closed captioning mode Customizing digital closed captioning styles Digital channels usually have one or more closed 1 Press MENU. The on-screen menu opens. captioning modes. The CC1 mode usually displays a text 2 Press to highlight Settings, then press .
Dynex 32" LED TV DX-32D310NA15 7 Press to select Mode, then press Labeling an input source select Custom. You can add a label to a video input source to make it easier to identify. These labels are displayed on the...
DX-32D310NA15 Dynex 32" LED TV 5 If you select Custom, press to highlight 3 Press to highlight Auto Channel Scan, then Custom Label, then press . press ENTER. The Choose Your TV Source screen opens. 6 Press to select a character.
Dynex 32" LED TV DX-32D310NA15 Hiding channels Setting up a favorite channel list You can hide channels in the channel list. When you You can create a favorite channel list so you can quickly press CH or CH , your TV skips the hidden channels.
DX-32D310NA15 Dynex 32" LED TV Viewing a favorite channel 5 Press to move to the channel label field. 1 Press FAV on your remote control. The Favorites channel list opens. 2 Press to highlight a channel, then press ENTER to tune to the channel.
Dynex 32" LED TV DX-32D310NA15 Maintaining 4 Press to select Yes (to reset all settings to factory default), or No (to not reset). If you select Yes, your TV turns off, then turns on again. The SETUP • Do not use your TV in areas that are too hot or too Wizard opens.
DX-32D310NA15 Dynex 32" LED TV Video and audio Problem Solution Dark, poor, or no Problem Solution • Try another channel. The station picture (screen is may be experiencing problems. Picture does not lit), but sound is • Change the aspect ratio. An •...
Page 65
Dynex 32" LED TV DX-32D310NA15 Problem Solution Problem Solution Only snow (noise) The picture has a • Try another channel. The station • A few bright or dark spots on an appears on the few bright or dark may be experiencing problems.
DX-32D310NA15 Dynex 32" LED TV General Problem Solution After images Problem Solution • Do not display a still image, appear. such as a logo, game, or No power. • Make sure that the power cord is computer image, for an plugged into a working outlet.
Page 67
Dynex 32" LED TV DX-32D310NA15 Problem Solution Problem Solution Password is lost. Control buttons • Enter 9999 to access parental • Make sure that the Button Lock do not work. controls, then set a new password. option is set to No. See “Locking...
DX-32D310NA15 Dynex 32" LED TV Specifications Outputs Video Specifications are subject to change without notice. Analog audio/Headphone 1 (side) Digital audio 1 (optical) (side) Dimensions and weight WiFi 29.3 × 17.5 × 3.5 in. (74.3 × 44.4. × 8.97 cm)
Universal remote control makes and models One for All 0054 You can operate your Dynex TV with a new or existing universal remote control. Phillips 0198, 0490 1 See the table below for common codes. If you have...
License. • Consult the dealer or an experienced radio/TV technician for If you require additional information please call the Dynex support help. line at 1-800-305-2204. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Products and parts replaced under this warranty THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, become the property of Dynex and are not returned to you. If service WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY of Products or parts are required after the Warranty Period expires, you PERIOD.
Need help?
Do you have a question about the DX-32D310NA15 and is the answer not in the manual?
Questions and answers