Av (Composite Video) (Good) - Dynex DX-24E310NA15 User Manual

14
DX-24E310NA15

AV (composite video) (good)

On your TV
AV
(composite
video)
cable
connector
AV
(composite
video) jack
1 Make sure that your TV's power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO jack and L and R audio jacks on the side of your TV and to the
composite video and audio out jacks on the cable or satellite box.
4 Plug your TV's power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or
Note
Cables are often color-coded to match color-coded jacks.
Cable or
satellite box
Audio cable
connectors
Analog
audio jacks
Note
When you connect the audio using the L and R audio jacks, the
audio output is analog.
to highlight AV, then press ENTER.
(composite video cable)
Side of TV
www.dynexproducts.com
AV cable
Dynex 24" LED TV