CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
DX-19E310NA15 Important Safety Instructions 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects CAUTION have fallen into the apparatus, the apparatus has...
DX-19E310NA15 Power source Note to CATV system installer Operate your TV only from the type of power source Article 820 of the National Electrical Code, ANSI/NFPA indicated on the marking label. If you are not sure of the No. 40 provides guidance for correct grounding.
Dynex 19" LED TV Introduction Congratulations on your purchase of a high-quality Dynex product. Your DX-19E310NA15 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall mount bracket Notes •...
Dynex 19" LED TV DX-19E310NA15 2 Secure the stand to your TV with the four provided screws. Screw type Screw length # of screws 8 mm Installing the wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load.
Page 10
DX-19E310NA15 Dynex 19" LED TV 2 If the TV stand is installed, remove the four screws that secure the stand to the stand column, then remove the stand. 3 Remove the four screws that secure the stand column to your TV, then remove the column.
Page 11
Dynex 19" LED TV DX-19E310NA15 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.
DX-19E310NA15 Dynex 19" LED TV TV components Buttons Package contents • Remote control and batteries (2 AAA) • TV stand • Screws (4) • AC power adapter • QUICK SETUP GUIDE • IMPORTANT INFORMATION Front Item Description Press to open the on-screen menu.
Dynex 19" LED TV DX-19E310NA15 Side jacks Item Description Connect headphones, an analog audio amplifier, a home theater system, or a sound bar to this jack. (audio out) For more information, see “Analog audio” on page 30. Connect a USB flash drive to this jack to view compatible JPEG picture files.
DX-19E310NA15 Dynex 19" LED TV Back Item Description Plug the AC power adapter into this DC IN (12V) connector. Connect the audio for a component video device to these jacks. For more information, see “Component video (better)” on page 15, 20, or 23.
Dynex 19" LED TV DX-19E310NA15 Remote control Button Description Press to turn closed captioning on or off. You can select CC On, CC Off, or CC On When Mute. See “Turning closed captioning on or off” on page 51. Press to change how the picture looks on the screen ASPECT (aspect ratio).
DX-19E310NA15 Dynex 19" LED TV What connection should I use? Connection type and Cable connectors jack Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device Coaxial digital to the best available connection.
Dynex 19" LED TV DX-19E310NA15 Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I...
DX-19E310NA15 Dynex 19" LED TV DVI (same as HDMI but requires an audio connection) Notes • Your TV supports DVI video only. • You must use the HDMI 1 (DVI) jack to connect a cable box using DVI. • To add sound for a DVI connection, connect external speakers or a sound bar to the cable or satellite box.
Dynex 19" LED TV DX-19E310NA15 Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Audio cable Component Audio cable video cable connector connectors Component video cable Component Analog video jacks...
DX-19E310NA15 Dynex 19" LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. Cable or satellite box On your TV...
Dynex 19" LED TV DX-19E310NA15 Coaxial (good) On your TV Cable or satellite box Coaxial cable connector ANT/CABLE IN Coaxial cable jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected equipment is turned off.
DX-19E310NA15 Dynex 19" LED TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected equipment is turned off.
Dynex 19" LED TV DX-19E310NA15 Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?”...
DX-19E310NA15 Dynex 19" LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV Audio cable Component Audio cable video cable connectors connectors Component video cable Component Analog video jacks...
Dynex 19" LED TV DX-19E310NA15 Composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. DVD or Blu-ray player On your TV...
DX-19E310NA15 Dynex 19" LED TV Connecting a game console HDMI (best) Side of TV On your TV Game console HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the game console is turned off.
Dynex 19" LED TV DX-19E310NA15 Component video (better) Notes • Your game console may require a special component video cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
DX-19E310NA15 Dynex 19" LED TV AV (composite video) (good) Notes • Most game consoles come with a special AV (composite video) cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
Dynex 19" LED TV DX-19E310NA15 Connecting a computer HDMI (best) Side of TV On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
DX-19E310NA15 Dynex 19" LED TV Notes • Your TV supports DVI video only. • You must use the HDMI 1 (DVI) jack to connect a computer using DVI. • To add sound for a DVI connection, connect external speakers or a sound bar to the computer.
Dynex 19" LED TV DX-19E310NA15 Connecting a USB flash drive Side of TV USB flash drive Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive.
DX-19E310NA15 Dynex 19" LED TV Connecting headphones When you connect headphones, audio plays through the headphones and the TV speakers are muted. See “Adjusting sound settings” on page 44. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
Dynex 19" LED TV DX-19E310NA15 Connecting external speakers or a sound bar Digital audio Side of TV On your TV Digital speaker system Digital coaxial audio cable Digital coaxial audio cable connector Sound bar Digital coaxial audio jack 1 Make sure that your TV’s AC power adapter is unplugged and the digital speaker system or sound bar is turned off.
DX-19E310NA15 Dynex 19" LED TV Analog audio Side of TV Analog speaker system On your TV Audio cable Sound bar Audio cable connector (audio out) jack 1 Make sure that your TV’s AC power adapter is unplugged and the analog speaker system or sound bar is turned off.
Dynex 19" LED TV DX-19E310NA15 Connecting a home theater system with multiple devices Blu-ray player or Cable or satellite TV box DVD player AV receiver Game console USB flash drive Antenna or cable TV connected directly to Computer the wall jack The connections you make depend on the video and audio jacks available on your devices.
DX-19E310NA15 Dynex 19" LED TV Connecting power 1 Plug the AC power adapter into the DC IN (12V) jack on the back of your TV. 2 Plug the other end of the cable into an AC power outlet. Notes • Your TV should only be operated from the power source indicated on the label.
Dynex 19" LED TV DX-19E310NA15 Using the remote control 3 Replace the battery compartment cover. Cautions • Batteries should not be exposed to Installing remote control batteries excessive heat, such as sunshine, heat 1 While pressing the release latch on the back of the registers, or fire.
DX-19E310NA15 Dynex 19" LED TV Turning on your TV for the first 5 If you selected Auto for Mode, press highlight Time Zone, then press to select your time zone. You can select Eastern, Central, time Mountain, Pacific, Alaska, Hawaii, Newfoundland, or Atlantic.
Dynex 19" LED TV DX-19E310NA15 Understanding the basics A If you are using an antenna for a standard or HD TV signal, select Antenna. Your TV scans for available channels. The scan may take several minutes. During scanning your TV searches for Turning your TV on or off digital channels first.
DX-19E310NA15 Dynex 19" LED TV Using the on-screen menus Channels menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode. • Menu items that are not selectable are grayed out.
Dynex 19" LED TV DX-19E310NA15 Using a USB flash drive Selecting a channel • Press CH+ or CH– to go to the next or previous channel on the memorized channel list. You can connect a USB flash drive to your TV to view •...
Page 42
DX-19E310NA15 Dynex 19" LED TV 3 Press to access the menu. Photos is highlighted. 6 To navigate the thumbnail index screen, press: • to browse through the files and folders. • ENTER to view a highlighted photo full screen, or open a highlighted folder.
Dynex 19" LED TV DX-19E310NA15 Viewing your favorite photos 4 Press ENTER to access the menu. The photos menu opens. After you have created your favorite photo list, you can browse your favorite photos quickly. 1 Switch to USB mode (see “Switching to USB...
DX-19E310NA15 Dynex 19" LED TV Viewing photos in a slideshow 4 Press ENTER to access the menu. The photos menu opens. 1 Switch to USB mode (see “Switching to USB mode” on page 37). 2 Press MENU. The USB menu opens.
Dynex 19" LED TV DX-19E310NA15 Customizing slideshow settings 5 Press to highlight Settings, then press ENTER. The photos settings menu opens. You can customize the slideshow settings by selecting Repeat, Shuffle, Speed, and Transition settings. 1 Switch to USB mode (see “Switching to USB...
DX-19E310NA15 Dynex 19" LED TV Adjusting the picture • Contrast—Adjusts the brightness of the light areas of the picture. • Brightness—Adjusts the brightness of the dark areas of the picture. Adjusting the TV picture • Color—Adjusts the color intensity of the picture. A 1 Press MENU.
Dynex 19" LED TV DX-19E310NA15 • Aspect Ratio—Adjusts how the picture fills the Automatically adjusting the aspect ratio screen. You can set the picture mode your TV uses when you turn it on. Aspect ratio option Example 1 Press MENU. The on-screen menu opens.
DX-19E310NA15 Dynex 19" LED TV Adjusting the sound • MTS/SAP—(Analog channels only) Selects the audio mode. You can select: • Mono—Select this option if there is noise or Adjusting sound settings static on weak stereo broadcasts. • Stereo—Select this option for programs 1 Press MENU.
Dynex 19" LED TV DX-19E310NA15 Setting parental controls 4 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to something you can Parental controls let you prevent your children from remember.
DX-19E310NA15 Dynex 19" LED TV Locking control buttons 6 Press to select On (locks the buttons) or Off (unlocks the buttons). When the button lock is turned On, the buttons on the 7 Press MENU to return to the previous menu, or press side of your TV are locked, and you can only operate EXIT to close the menu.
Dynex 19" LED TV DX-19E310NA15 5 Press to highlight System Lock. 4 Press the number buttons to enter the four-digit password. The parental controls menu opens. 6 Press to select On (turns on parental controls) or Off (turns off parental controls).
DX-19E310NA15 Dynex 19" LED TV Setting parental control levels Canadian rating levels You can set parental control levels for the U.S. and Canadian English ratings Canada. Parental control settings are only applicable to Exempt programming programs that have a rating signal.
Dynex 19" LED TV DX-19E310NA15 4 Press the number buttons to enter the four-digit Downloading rating information password. The parental controls menu opens. 1 Press MENU. The on-screen menu opens. 2 Press to highlight Settings, then press . The Settings menu opens with Parental Controls highlighted.
DX-19E310NA15 Dynex 19" LED TV 6 To reset the RRT information to the factory default, 5 If you selected Auto for Style, press press to highlight Reset RRT, then press highlight Time Zone, then press to select ENTER. A box opens. Follow the on-screen your time zone.
Dynex 19" LED TV DX-19E310NA15 5 To turn off the sleep timer, select Off. Selecting the analog closed captioning mode 6 Press EXIT to close the menu. Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text Note version of the TV program audio in a small banner.
DX-19E310NA15 Dynex 19" LED TV Selecting the digital closed captioning mode Customizing digital closed captioning styles Digital channels usually have one or more closed 1 Press MENU. The on-screen menu opens. captioning modes. The CC1 mode usually displays a text 2 Press to highlight Settings, then press .
Dynex 19" LED TV DX-19E310NA15 7 Press to select Mode, then press Labeling an input source select Custom. You can add a label to a video input source to make it easier to identify. These labels are displayed on the...
DX-19E310NA15 Dynex 19" LED TV 5 If you select Custom, press to highlight 3 Press to highlight Auto Channel Scan, then Custom Label, then press . press ENTER. The Choose Your TV Source screen opens. 6 Press to select a character.
Dynex 19" LED TV DX-19E310NA15 Hiding channels Setting up a favorite channel list You can hide channels in the channel list. When you You can create a favorite channel list so you can quickly press CH or CH , your TV skips the hidden channels.
DX-19E310NA15 Dynex 19" LED TV Viewing a favorite channel 5 Press to move to the channel label field. 1 Press FAV on your remote control. The Favorites channel list opens. 2 Press to highlight a channel, then press ENTER to tune to the channel.
Dynex 19" LED TV DX-19E310NA15 Maintaining 4 Press to select Yes (to reset all settings to factory default), or No (to not reset). If you select Yes, your TV turns off, then turns on again. The SETUP • Do not use your TV in areas that are too hot or too Wizard opens.
DX-19E310NA15 Dynex 19" LED TV Video and audio Problem Solution Dark, poor, or no Problem Solution • Try another channel. The station picture (screen is may be experiencing problems. Picture does not lit), but sound is • Change the aspect ratio. An •...
Page 63
Dynex 19" LED TV DX-19E310NA15 Problem Solution Problem Solution Only snow (noise) The picture has a • Try another channel. The station • A few bright or dark spots on an appears on the few bright or dark may be experiencing problems.
DX-19E310NA15 Dynex 19" LED TV General Problem Solution After images Problem Solution • Do not display a still image, appear. such as a logo, game, or No power. • Make sure that the AC power computer image, for an adapter is correctly connected to extended period of time.
Dynex 19" LED TV DX-19E310NA15 Specifications Problem Solution One or more • Make sure that the channels are channels do not Specifications are subject to change without notice. not blocked. See “Setting parental display. control levels” on page 48. Dimensions and weight •...
Video remote controls Analog audio/Headphone 1 (side) Digital audio 1 (coaxial) (side) You can operate your Dynex TV with a new or existing WiFi universal remote control. Ethernet 1 See the table below for common codes. If you have Audio...
Dynex 19" LED TV DX-19E310NA15 Legal notices Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control makes and models FCC Statement This device complies with Part 15 of the FCC Rules. Operation is...
Page 68
Dolby Laboratories. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. If you require additional information please call the Dynex support line at 1-800-305-2204. www.dynexproducts.com...
Products and parts replaced under this warranty THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, become the property of Dynex and are not returned to you. If service WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY of Products or parts are required after the Warranty Period expires, you PERIOD.