Dynex DX-24E310NA15 Quick Setup Manual

QUICK
SETUP GUIDE
24" LED TV
DX-24E310NA15
How do I prepare my TV for wall mounting
Thank you
A Lay the TV down on a soft surface, then remove the three screws and the stand column.
for purchasing this state-of-the-art
B Attach the wall-mount bracket to your TV using either the four provided M4 × 8 mm or the
Dynex television. We hope you enjoy
M4 x 28 mm screws that came with the TV.
the quality and reliability of this
WARNING:
television for years to come.
If your wall mount uses spacers, use the M4 x 28 mm screws. If your wall mount does not use spacers,
use the M4 x 8 mm screws.
C See the instructions that came with the wall-mount bracket for information about how to
correctly hang your TV.
Included accessories
1 2
4 5
7 8
0
PICTURE AUDIO MTS/SAP SLEEP
INPUT
VOL CH
ENTER
MENU
DX-RC5NA-15
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.dynexproducts.com,
click Support & Service, enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click Search.
M4 screws (8 mm length) (4 pcs.)
M4 screws (28 mm length) (4 pcs.)
Use these screws for wall-mounting.
Do NOT use the screws that came
with the wall mount because they
may be too long.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You'll need: Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface.
B Find the front of the TV stand. Hook the tab on the stand column
through the slot on the stand, then push the stand into place.
C Secure the TV stand to the stand column with the provided M4 (12 mm) screw.
- OR -
(not for use with a TV stand)
Do NOT use the screws that came with the wall mount because they may be too long.
Which cables do you have?
Your TV has several di erent jacks for connecting devices. For the
STOP!
best video quality, use the best available connection.
Do not plug your
power cord in until all
other devices have
VIDEO QUALITY
been connected.
BEST
GOOD
Composite video and analog audio (AV)
GOOD
3
6
9
INFO*
Note: You can also connect a DVI device to your TV. See your online User Guide for
Remote control
connection instructions. This TV only supports DVI video.
and two AAA batteries
EXIT
Features
Front view
Power Cord
TV stand
Back view
M4 screws
Remote control sensor
(12 mm length) (3 pcs.)
Power indicator
Wall mounting hardware
HDMI2 HDMI1/DVI
USB
DC IN
(12V)
Note: Images do not necessarily represent the exact design of your television.
MAKING CONNECTIONS
How do I watch TV (cable or satellite box) and/or connect a device such as a
DVD or Blu-ray disc player, game station, or camcorder?
Using an HDMI cable (BEST)
JACK TYPE CABLE CONNECTOR
HDMI video/audio
Coaxial video/audio
Using an AV cable (GOOD)
USB
DC IN
(12V)
How do I connect my TV to an antenna or cable wall jack?
VIDEO L IN R
DIGITAL SERVICE AUDIO OUT
ANT/
OUTPUT PORT
AV IN CABLE IN
(COAXIAL)
Before using your new product, please read these instructions to prevent any damage.
AUDIO/VIDEO
OUT
AV cable option
VIDEO L IN R
VIDEO L IN R
HDMI2 HDMI1 DIGITAL
SERVICE
HDMI2 DIGITAL
USB HDMI1 SERVICE AUDIO OUT
DC IN OUTPUT ANT/
AV IN OUTPUT
AV IN PORT PORT
(12V) CABLE IN
(COAXIAL)
(COAXIAL)
VIDEO L IN R
HDMI2 HDMI1/DVI DIGITAL SERVICE ANT/ AUDIO OUT
DC IN USB ANT/
AV IN OUTPUT PORT CABLE IN
(12V)
CABLE IN
(COAXIAL)
Wall mount installation guide
(not included)
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI
jack. However, certain devices must be
connected to the DVI jack. See the
instructions that came with your DVI
device for more information.
Note: This TV only supports DVI video.
AUDIO OUT
ANT/
CABLE IN
CABLE
OVER