Table of Contents
Advertisement
26
DX-24E310NA15
Analog audio
On your TV
Audio cable
connector
AUDIO OUT/
jack
1 Make sure that your TV's power adapter is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the AUDIO OUT/
the analog speaker system.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
Analog speaker
system
Sound bar
www.dynexproducts.com
Audio cable
Side of TV
jack on the side of your TV and to the AUDIO IN jacks on
Dynex 24" LED TV
Advertisement
Table of Contents
