Maintenance - Husqvarna 330iKE Operator's Manual

• Push the speed mode button until the
correct speed mode is selected. The LEDs
come on, refer to
page 16 .
Automatic shutdown function
The product has an automatic shutdown
function that stops the product if the product
is not used. The green LED for start/stop
indication goes off and the product stops after
120 seconds.
To stop the product
1. Release the power trigger or the power
trigger lockout.
Introduction
WARNING:
understand the safety chapter
before you do maintenance on the
product.
Maintenance schedule
WARNING:
before you do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not
use water.
Examine that the power button works correctly and is not dam-
aged.
Make sure that the power trigger and the power trigger lockout
function correctly from a safety point of view.
2114 - 004 - 03.11.2023
Speed mode function on
Maintenance
Read and
Remove the battery
2. Push the power button.
3. Push the release buttons on the battery
and pull the battery out.
The following is a list of the maintenance
steps that you must do on the product.
Introduction on page 17 for more
Refer to
information.
Daily
Month-
Weekly
ly
X
X
X
17