Installing The Camera Using The M3 Fixing Screw Holes; Connections; Connecting To An Ac Outlet - Sony EVI-D80N Operating Instructions Manual

Removing the camera
1
Remove the three screws used to
attach the camera in step 6 of
"Installation."
2
While pushing the entire camera up
towards the ceiling, move the camera
to the front.
The hooks will disengage, and you can
remove the camera.
Installing the Camera Using
the M3 Fixing Screw Holes
Attach the camera using 3 M3 fixing screw
holes located on the bottom of the camera.
Attach the camera to a fitting with a flat
surface using M3 screws with the following
specifications.
4
= 3 – 5 mm
4
= 1/8 – 7/32 inches
42

Connections

Connections
Use the AC power adaptor and AC power
cord to connect the camera to an AC outlet.
M3 screw

Connecting to an AC Outlet

DC 12 V