Sony EVI-D80N Operating Instructions Manual page 51

Using the VISCA RS-422 connector
plug
1
Insert a wire (AW G Nos. 28 to 18)
into the desired wire opening on the
supplied VISCA RS-422 connector
plug, and tighten the screw for that
wire using a flat-head screwdriver.
Wire
Flat-head screwdriver
2
Insert the VISCA RS-422 connector
plug into the VISCA RS-422
connector on the rear of the camera.
Notes
• In order to stabilize the voltage level
of the signal, connect both ends to
GND.
• Do not make a VISCA RS-232C
connection when there is already an
existing VISCA RS-422 connection.
1 2
3 4
5 6
7 8
9
51
Specifications