Table of Contents
Advertisement
Restore Setting
Firmware upgrade
Note!! That it mus
t make sure that the Firmware only applies to this device, once update
will be burned into FLASH ROM of system.
Warning!!!
The download firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the download procedure, it might
possibly cause serious damag
Please be aware that you should not turn off the power during updatin
and wait for finish message.
Furthermore, do
not try to
System Restart
Click the "Browse" button to locate the saved backup file and
then click the "Restore Setting" button. The settings will be
restored to the previous configuration.
The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this moment
3. Disable Motion Detection function.
4. Select "Firmware name"
5. Select the Firmware binary file.
6. Once the firmware file was selected, select "Upgrade".
7. The upgrade progress information will be displayed on the
screen.
8. A message will be shown while the firmware upgraded.
Once the upgrading process completed, the device will
reboot the system automatically.
9. Please wait for 80 seconds, and then you can use PLANET
IPWizard II to search the device again.
e to the device.
upgrade new firmware if it's not necessary.
The device is restarted without changing any of the settings.
59
, it
g the firmware
Advertisement
Table of Contents
