General Safety Preca Utions; Steps Bef Ore Using A New Power Cutter; Personal Protective Equipment - Husqvarna K 3000 Cut-n-Break Operator's Manual

Power cutter

Hide thumbs Also See for K 3000 Cut-n-Break:

Operator's manual (24 pages)

Operator's manual (20 pages)

Operator's manual (24 pages)

Table Of Contents

Table of Contents

Steps bef ore using a new power

cutter

•

Please read the operator's manual carefully and make

sure you understand the instructions before using the

machine.

•

The machine is only designed for cutting hard

materials, such as concrete, brick, masonry as well as

cast iron and cement pipes.

•

Let your Husqvarna dealer regularly check the power

cutter and make essential adjustments and repairs.

W ARNING! Under no circumstances

should you modify the original design of

the machine without approval from the

manufacturer. Always use original spare

parts. Unauthorized modiﬁcations and/or

accessories may lead to serious injury or

death to the user or others.

W ARNING! Use of products which cut,

grind, drill, sand or shape material can

generate dust and vapors which may

contain harmful chemicals. Know the

nature of the material being worked on

and wear appropriate dust mask or

respirator protection.

W ARNING! A power cutter is a

dangerous tool if used carelessly or

incorrectly and can cause serious, even

fatal injuries. It is extremely important

that you read and understand the

contents of this Operator's Manual.

Husqvarna Construction Products has a policy of

continuous product development. Husqvarna reserves

the right to modify the design and appearance of products

without prior notice and without further obligation

introduce design modiﬁcations.

All information and all data in the Operator's Manual were

applicable at the time the Operator's Manual was sent to

print.