Fanimation Old Havana Series Owner's Manual page 4

How to Assemble Your Ceiling Fan Accessory
Tools Needed for As sembly
• One Phillips head screwdriver
• One stepladder
• One 1/4˝ blade screwdriver
• One wire stripper
• Three wire connectors (supplied)
• Allen Wrench (supplied)
WARNING
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 6). If
you feel you do not have enough wiring knowledge
or experience, have your fan installed by a licensed
electrician.
Unpacking Instructions for the Ceiling Fan Accessory
WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only
those parts supplied with this product and/or any
accessories designated specifically for use with
this product by Fanimation.
or accessories not designated for use with this
product by Fanimation could result in personal injury
or property damage. Contact your retail store for
missing or damaged parts.
1. Check to see that you have received the fol lowing
parts:
NOTE: If you are uncertain of part de scription, refer to
exploded view illustration. (Page 17)
• Downrod / Hanger Ball Assembly
• Ceiling Canopy / Hanger Bracket
• Motor Coupling Cover
• Ceiling Fan Hardware Bag
1. Threaded Rods (2)
2. Knurled Knobs (2)
3. External Lock Washers (2)
4. Mounting Flange
5. Wire leads: Black, White, Green
6. ¼-20 x 1½˝ allen head bolts (3)
7. Internal 3" dia. x ¼˝ disc
8. Wire connectors (6)
9. ½˝ wire grommet
10. ¼-20 x 3˝ Installation Rod
11. 3/16˝ allen wrench
Substitution of parts
2
Materials
Wiring outlet box and box con nectors must be of
type required by local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
Installed Wire Length
Up to 50 ft.
50-100 ft.
Upper Inner
Packaging
Downrod /
Hanger Ball
Ceiling
Canopy
Hanger
Bracket
Carton
Wire Size AWG
14
16
Motor
Coupling
Cover
Ceiling Fan
Hardware bag
Lower Inner
Packaging
Fig. 2