Seatback Latches - Chevrolet Corvette 2013 Owner's Manual

3-6 Seats and Restraints
(Easy Exit Driver Seat): Press
to save and recall the easy exit seat
position.
To save into memory:
1. Recall the desired driving
position by pressing 1.
2. Adjust the seat and the
telescopic steering column to the
desired exit position.
3. Press and hold until
two beeps sound.
4. Repeat for a second driver
position using 2.
To recall, press and release
The vehicle must be in P (Park) for
an automatic transmission or the
parking brake must be set for a
manual transmission. A single beep
sounds. The seat and telescopic
steering column will move to the
position previously stored for the
identified driver.
If this feature is programmed on in
the vehicle personalization menu,
automatic recall occurs when one of
the following conditions is met:
The vehicle is turned off, in
Retained Accessory
Power (RAP) or accessory
mode, and the driver door is
opened.
The vehicle is turned off, or in
RAP, and the unlock button on
the RKE transmitter is pressed.
If something has blocked the driver
seat while recalling the exit position,
the recall may stop. Remove the
. obstruction; then press and hold the
power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see your dealer for
service.
See Vehicle Personalization on
page 5 51.

Seatback Latches

To fold a seatback forward, lift the
latch on top of the backside of the
seat. The seatback locks when
folded down.