10-42
Vehicle Care
High Intensity Discharge
(HID) Lighting
WARNING
The high intensity discharge
lighting system operates at a very
high voltage. If you try to service
any of the system components,
you could be seriously injured.
Have your dealer or a qualified
technician service them.
The vehicle may have HID
headlamps. After an HID headlamp
bulb has been replaced, you may
notice that the beam is a slightly
different shade than it was originally.
This is normal.
Headlamps, Front Turn
Signal and Parking
Lamps
A. High-beam Headlamp
B. Low-beam Headlamp
C. Front Parking/Turn Signal
If the low-beam headlamp needs to
be replaced, see your dealer. See
High Intensity Discharge (HID)
Lighting on page 10 42 for more
information.
To replace a high-beam or front
parking/turn signal bulb:
1. Turn the wheel to allow access
to the wheel well.
2. Remove the three outer
fasteners to move the access
panel back.
3. Remove the outer cover to
expose the high-beam headlamp
bulb socket.