License Plate Lamp; Replacement Bulbs; Electrical System; Overload - Chevrolet Corvette 2013 Owner's Manual

10-44 Vehicle Care
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket by turning
clockwise.

License Plate Lamp

To replace one of these bulbs:
1. Remove the two screws (A) from
the license plate lamp
assembly (B).
2. Pull the lamp assembly down
and turn the bulb socket
counterclockwise and out of the
lamp assembly.
3. Pull the old bulb straight out of
the socket.
4. Install the new bulb.
5. Reverse Steps 1 3 to reinstall
the license plate lamp assembly.

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Front Parking/Turn
Signal
Headlamp,
High-Beam Lamp
License
Plate Lamp
Stoplamp/Taillamp/
Turn Signal Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Electrical System

Overload

The vehicle has fuses and circuit
Bulb
breakers to protect against an
Number
electrical system overload.
3157K
When the current electrical load is
5702KA too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
H9
normal or the problem is fixed. This
greatly reduces the chance of circuit
194 overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
3057K
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.