Table of Contents
Advertisement
an existing and accessible Wireless Access Point (WAP).
These WAPs can either be Open (unsecured) or Secured
(requiring knowledge of the router name and password).
Turning Wi-Fi On
By default, your device's Wi-Fi feature is turned off. Turning
Wi-Fi on makes your device able to discover and connect to
compatible in-range WAPs.
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON
Connect to a Wi-Fi Network
1. From the Home screen, tap
The network names and security settings (Open or
Secured) of detected Wi-Fi networks are displayed in
the Wi-Fi networks section.
2. Tap a network.
Note: When you select an open network, you will be
automatically connected to the network.
3. If the network is secured, enter the password.
➔ Settings.
.
➔ Settings ➔ Wi-Fi.
Manually add a network connection
1.
Tap Add Wi-Fi network.
2.
Enter the Network SSID. This is the name of your
Wireless Access Point.
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4.
If secured, you will also need to enter your WAP's
password.
5. Tap Save to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Connect to a Wi-Fi network using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a secured network.
Connect with a WPS button
1. From the Home screen, tap
➔ Settings ➔ Wi-Fi.
Connections
153
Advertisement
Table of Contents
