Table of Contents
Advertisement
➔ WPS push button.
2. Tap
3. Press the WPS button on your router within 2 minutes.
Connect with a WPS PIN
1. From the Home screen, tap
➔ WPS PIN entry.
2. Tap
3. Enter the indicated PIN on your Wi-Fi router. The setup
can take two minutes to complete.
Turning Wi-Fi Off
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap
2. Tap Scan.
All available Wi-Fi networks are displayed.
154
➔ Settings ➔ Wi-Fi.
➔ Settings.
.
OFF
➔ Settings ➔ Wi-Fi.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless
Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 155.
Wi-Fi Advanced Settings
The Advanced Wi-Fi menu allows you to set up many of your
device's Wi-Fi services, including:
•
Network notification when an open network is available
•
Wi-Fi sleep policy
•
Checking for Wi-Fi Internet service
•
Automatically connecting to a Wi-Fi hotspot when detected
•
Specifying your Wi-Fi frequency band
•
Viewing your device's MAC and IP Address
Advertisement
Table of Contents
