Function Selection Of Wireless Remote Controller; Temperature Display - Mitsubishi Electric PUZ-A18NHA4 Service Manual

12-3. Function selection of wireless remote controller

TEMPERATURE DISPLAY °C/°F SETTING (Change of temp mode from °F to °C)
1 Press the set button with something sharp at the end. MODEL SELECT
AUTO START
2 Press the
button. "F:" blinks.
3 Press the
button. "C:" blinks.
4 Press the set button with something sharp at the end. MODEL SELECT is lighted for 3 seconds, then turned off.
TEST
CHECK
COOL
RUN °F
MODEL
°C
DRY
SELECT
STOP AMPM
AUTO
FAN
SWING
FAN
START AMPM
HEAT
NOT AVAILABLE
ON/OFF TEMP
FAN AUTO STOP
MODE VANE AUTO START
CHECK LOUVER h
TEST RUN min
SET RESET CLOCK
95
blinks.