End Of The Programme - Siemens WM14Y890GB Instruction Manual And Installation Instructions

Ø

End of the programme

Finished, remove washing is indicated on the display panel.
If Foam has been detected is also indicated on the display panel,
the washing machine has detected too much foam during the the washing machine has detected too much foam during the the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional wash programme and therefore automatically activates additional wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam. rinse cycles to eliminate the foam. rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load. Dose less detergent in the next wash cycle with the same load. Dose less detergent in the next wash cycle with the same load.
Reduce basic dosage. ~ Page 36
Reduce basic dosage. Reduce basic dosage.
End of programme by Rinse Hold
1. Select Spin (If required, adjust the spin speed) or Drain.
2. Select Start/Reload
v
Finished, remove washing Finished, remove washing Finished, remove washing
Rinse hold reached:
Select "spin" or "drain"
and then "start".
Spin Drain
b b
Ü
.
is also indicated on the display panel, is also indicated on the display panel,
21