Sony Bravia KDL-60EX703 Setup Manual page 26

Secured Network without Wi-Fi Protected Setup (WPS)
For setting up a wireless LAN, SSID (wireless network name) and security key (WEP or
WPA key) will be required. If you do not know them, consult the instruction manual of
your router.
1
Select "Wireless Setup» from the "Network Setup» start-up screen.
2
Select "Scan;' then select a network from the list of scanned wireless networks.
3
Follow the instructions that appear on the setup screen.
Unsecured Network with Any Type of Wireless LAN Router
For setting up a wireless LAN, SSID (wireless network name) will be required. Security
key (WEP or WPA key) will not be required because you need to select no security
method in this procedure.
1
Select "Wireless Setup» from the "Network Setup» start-up screen.
2
Select "Scan;' then select a network from the list of scanned wireless networks.
3
Follow the instructions that appear on the setup screen.
Checking the Network Status
Enter the respective alphanumeric values for your router if necessary. The items
that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on
the Internet service provider or router. For details, refer to the instruction manuals
provided by your Internet service provider, or those supplied with the router.
1
Select "Auto» to set the IP Address and proxy server automatically, or "Custom» to set
them manually.
2
Follow the instructions that appear on the setup screen.
{b
• If you use WPS for network setup, the security settings of the wireless LAN router activate,
and any equipment previously connected to the wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the disconnected equipment and then reconnect.
Or, you can deactivate the security settings of the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.