Jøtul C 350 Installation And Operating Instructions Manual page 11

Installation
1. 1. 1. 1. 1. Remove the existing damper and linkage compo-
nents from the fireplace. Alternatively, you can
wire the damper plate to lock it in the open
position. Thoroughly clean the firebox and
smokeshelf area with a wire brush.
2. 2. 2. 2. 2. If If If If If the fir the fir the fir the fir the fireplac eplac eplac eplac eplace has been modified e has been modified e has been modified e has been modified t t t t t o ac e has been modified
da da te installa te installa tion, tion,
date installa da da te installa te installation, tion, tion, use anchors or masonry nails to
attach the metal Fireplace Conversion Notice
Plate (PN 220508) to the back wall of the masonry
fireplace firebox where it will be readily seen
should the insert be removed.
3. 3. 3. 3. 3. Install the Flex Connection plate according to the
manufacturer's instructions. The sealing plate
may require trimming to accommodate your
specific fireplace damper.
Masonry or Listed
HT Prefabricated
Chimney Cap
Damper linkage
removed and
plate is removed
or locked open
Figure 8. Positive Chimney Connection - Canada.
o ac o ac o acc c c c c ommo- o ac ommo- ommo- ommo- ommo-
Sealed
connection to
chimney cap
Attach
Fireplace
Conversion
Notice Plate
to Rear Wall
of Fireplace
11