Miele CM 5100 Operating Instructions Manual page 64

Problem solving guide
Message
FILL WATER
CONTAINER
AND PLACE IN
THE MACHINE
appears in the
display, although
the water container
is full.
Dispensing stops
and the following
message appears in
the display:
PROCESS STOPPED
WATER CONT. EMPTY
64
Possible cause and remedy
The water container is not sitting correctly.
^ Remove the water container and replace it.
If the fault message appears in the display again,
^ empty the water container.
^ Shake the water container to check that the float is
moving freely.
^ Fill the water container with fresh tap water and push it
into the appliance.
If, after doing this, the message is still in the display,
contact Miele.
There is too little water in the container.
^ Fill the water container with fresh tap water.
^ Press the OK button.
The following message will appear in the display:
CONTINUE DISPENSING - YES B.
^ Press the OK button to continue dispensing,
or select NO to cancel preparation.