Lennox Hearth Products CI1500DVF Care And Operation Instructions Manual page 13

4. Place the center log over the corresponding pins next to the front
left log as shown in Figure 12.
Figure 12
5. Install the right front log onto the corresponding burner pin and
sub-floor right tab as shown in Figure 13.
Figure 13
6. Install the left top twig onto the corresponding pin on the rear log
and align it with the indentation on the front left log as shown in
Figure 14.
Left Top
Twig
Figure 14
Center
Log
Piece
Right Front Log
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
7. Install the center top twig onto the corresponding pin on the rear
log and align it with the indentation on front left log as shown in
Figure 15.
Figure 15
8. Install the front right twig onto the corresponding pin on the right
front log. Align the twig with the indentation on the front right log
as shown in Figure 16.
Figure 16
9. Place the glowing embers on the burner as shown in Figures 17
and 18.
One package of ember material has been included with this log
set You will not need to use the entire bag.
IMPORTANT: The quantity and placement of the ember material
can affect stove performance therefore it is very important that
it be placed as shown in Figures 17 and 18.
Center
Top Twig
Right
Front Twig
13