Table of Contents
Advertisement
NOTICE: The serial ATA cable is used to transfer data of very high
frequency. It is suggested not to connect and disconnect it too often,
because the connectors are easily damaged.
2.4 Compatibility
AEC-6896 is particularly designed for DMA hard drive, and has been fully tested
with the hard drives available in laboratory. It supports various ATA 66/100/133 hard
drives and SATA ones as listed below.
C
Seagate
C
IBM
C
Maxtor
C
Western Digital
For the newest compatibility, please visit http://www.acard.com
SATA Cable
Figure 2-3
9
AEC-6896S/6896 Manual
Power Cord
Advertisement
Table of Contents
