Table of Contents
Advertisement
5.2.5 System Info
Click "System Info" to find the information and status of your RAID and hard drives.
5.2.6 Event Log
Click "Event Log" to find all important things about RAID such as the damage, re-
moval, and adding of hard drives. However, in the beginning there is no record.
5.2.7 Array Management
Click "Array Management" to find a more user-friendly interface than BIOS. Through
the interface you can set or change your RAID easily. Figure 5-3 shows that Array 0
is set as RAID 0+1 and contains four hard drives.
NOTICE: The numbering of hard drives is HD0: SATA1, HD2: SATA2,
HD4: SATA3, HD6: SATA4. The numbering of array is according to the
first hard drive's number in the array.
AEC-6896S/6896 Manual
Figure 5-3
27
Advertisement
Table of Contents
