Table of Contents
Advertisement
AEC-6896S/6896 Manual
Chapter 6 Troubleshooting
After installing AEC-6896, if it cannot work normally, please follow the checklist
given below to solve the problems.
(1). Inspect if the power cord's connectors are loose, or if the watt of power supply
is not sufficient.
(2). Inspect if the jumper settings on the hard drives are all CS or Master or Single
drive.
(3). Inspect if AEC-6896 is firmly inserted into the PCI slot.
(4). Inspect if the connectors of Serial ATA cable are loose or damaged.
(5). Inspect if the converter is firmly connected to the hard drive and power supply.
28
Advertisement
Table of Contents
