Making A Connection To A Wap Service - Nokia 3610 User Manual

   "%      !!"#$% 
M e n u f u n c t i o n s
• Data call type: Scroll to
Analogue or ISDN, and press
Select.
• User name: Key in the user
name (press
and press OK.
• Password: Key in the
password and press OK.
6. To rename the set, choose
Rename from the Options menu.
Making a connection to
a WAP service
First, activate the settings of the
WAP service:
1. In the Services menu, scroll to
Settings and press Select.
2. Scroll to Connection settings
and press Select.
3. Scroll to the appropriate setting
set and press Options.
4. Scroll to Activate and press
Select.
If you want to use the same WAP
service (the one you accessed using
the Home option in the Services
menu) as the last time, you do not
need to activate its settings again.
Next, do one of the following to
connect to the WAP service:
• Open the homepage of the WAP
service: In the Services
scroll to Home and press Select.
36
• Select a bookmark of the WAP
service: In the
scroll to Bookmarks
Select. Scroll to the desired
bookmark and press Options.
for a dot)
Scroll to Go to
Make sure that the currently
active set of connection settings
can be used with the WAP page
to which the bookmark refers. If
the bookmark does not work (in
this case Check service settings
may be displayed), change the set
of connection settings and try
again.
• Enter the address of the WAP
service: In the
scroll to Go to address
Select. Key in the address (press
for special characters) of
the WAP service and press OK.
Note that it is not necessary to
add the prefix http:// in front of
the address since it will be added
automatically. If you are using a
protocol other than http (such as
ftp), add the appropriate prefix.
Start the connection in
standby mode: If you have
activated the settings of the
WAP service, you can
connect to the WAP service
in the standby mode by
pressing and holding
menu,
Services menu,
and press
and press Select.
Services menu,
and press
.