Getting Started; Unpacking; Hooking Up The System - Sony CDP-CX355 Operating Instructions Manual

, " Getting Started
x
,iUidi
Unpacking Hooking Up the System
Check that you received the following items:
• Audio cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
To an AC outlet
-"'"~.
White
(L)
-""''''''''''. Red
(R)
DIGITAL OUT
(OPTICAL)
CD
player
- ..... COMMAND MODE
To ANALOG OUT (R)
: Signal flow
White
(L)
Red
(R)
CONTROL A 1 IT
To audio input
To ANALOG OUT (L)
To an AC outlet
What cords willi need?
Audio cord (1) (supplied)
Inserting batteries into the remote
You can control
~he
player using the supplied remote.
Insert two size AA (R6) batteries (supplied) by
matching the
+
and - on the batteries to the diagram
inside the battery compartment.
Insert the negative (-) end first, then push in and down
until the positive (+) end clicks into position.
When using the remote, point it at the remote sensor 11
on the player.
'Q'
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.