Storing Custom File Information Using A Keyboard - Sony CDP-CX355 Operating Instructions Manual

Storing Information About CDs (Custom Files)
"Q'
If you have made a mistake while inputting the
character(s)
To correct the character
1 Press
~
or
~
until the cursor moves to the
incorrect character.
ALL DISCS
CD'
DISC
I
SONYH:EJ'·S
AS
Storing Custom File
Information Using a Keyboard
You can store the Disc Memo for one disc sequentially
using an IBM-compatible PC keyboard* (not supplied).
* Power consumption must be 120 rnA or less.
Keyboard jack
2 Input the correct character.
ALL DISCS
COt
DISC
I
SON YH: I
~:r
S
AS
b
o
0 0 0 0
o
0 0 0 0
o
0 0 0 0
=
©t8'
c::::=lc:::J~~
c:::J
c=l c::::::J
c=:J
~I'~
!·"I·j
To insert a character between the input characters
1 Press
~
or
~
until the cursor moves next to the
point you want to insert, and enter a blank space.
2 Move the cursor to the blank space you have just
entered, and enter a character.
1
Connect a keyboard to the keyboard jack on the
front panel of the player.
o
0 0 0 0
o
0 0 0 0
o
0 0 0 0
b
"Q'
You can label discs of the second CD player
See "Labeling discs of the second CD player" on page 22.
2
After selecting the disc you want on the player,
press the Enter key.
3
Input the characters you want, then press the Enter
key to store the information.
"Q'
You can delete all characters of selected item
While holding down the Shift key, press the Delete key.
Notes
• If the cursor keys do not work correctly and you cannot
complete the task using the keyboard, disconnect the
keyboard then reconnect it to the player and try again.
• If the keyboard is not the USA model, the characters may be
input differently from those on the keys.
The USA keyboard layout is shown below.