Devolo dLAN Manual page 41

40 TV and radio programme
devolo dLAN TV SAT Receiver Kit
Note that different TV sets respond different-
ly to changed display parameters from the
dLAN TV SAT to IP Receiver and may auto-
matically change your own display mode. In
this case, refer to the manual for your TV set.
These output settings were applied when you
initially set up the device.
b
TV type: Select "4:3" if you have a conventional
TV set or "16:9" if you have a broadband TV set
connected.
b
Display format:
Auto: automatic scaling of the display format
to the previously set format.
Pillar box: If you display "4:3" programme
content on a "16:9" TV set or vice versa, a
black border may appear on both sides of the
screen.
Zoom: Zoom is used to select what to do with
the black frames and how a "4:3" image
should be adapted to suit a "16:9" screen and
vice versa. This setting can also be directly
selected using the Videotext (yellow) key on
the remote control.
TV output (SCART): The receiver can output
video signals in RGB and CVBS format via the
TV SCART output. Although the RGB format
provides the best display quality, not all sets
can process this signal. Use the LEFT/RIGHT
arrow keys to select RGB or CVBS.
b
Prefer Dolby Digital: Use the UP/DOWN arrow
keys to select this option, and press the LEFT/
RIGHT arrow keys to change the setting to Yes or
No.
b
SPDIF Output:
LPCM—the dLAN TV SAT to IP Receiver will
output stereo PCM
Dolby Digital—if Dolby Digital audio is avail-
able and
dLAN TV SAT to IP Receiver will output Dolby
Digital.
b
HDMI Audio Output:
LPCM—the dLAN TV SAT to IP Receiver will
output stereo PCM.
Dolby Digital—if Dolby Digital/Dolby Digi-
tal+ audio is available and selected, the
dLAN TV SAT to IP Receiver will output Dolby
Digital/Dolby Digital+.
This function is only available if the op-
tical audio output is used.
b
The Software Version field displays the version
number.
selected, the