First Use; Installing Devolo Software; Software For Windows - Devolo dLAN Manual

To avoid electrical damage when con-
necting
dLAN TV SAT to IP Receiver, always use
the power pack supplied. This is de-
signed to supply electrical devices with
12 V DC. Make sure there is a separate
power supply when connecting several
devices.

3.6.1 First use

After successfully connecting all components of
the dLAN TV SAT Receiver Kit, switch on the
dLAN TV SAT to IP Receiver.
Then switch on the TV set.
If you have connected the devices by HDMI,
select the corresponding output to display
the TV image.
Press the button for the signal input on the TV set
(usually at the side) or on the remote control. The
dLAN TV SAT to IP Receiver will take a few sec-
onds to start.
The TV and radio software assistant will then start
automatically. For more information, refer to the
next chapter 4 TV and radio programme.

3.7 Installing devolo software

the

3.7.1 Software for Windows

devolo dLAN Cockpit finds all reachable dLAN adapt-
ers in your dLAN network, displays information about
these devices and encrypts your dLAN network individ-
ually.
To install the software, insert the included CD-ROM in
the CD drive of your computer. This has to be connect-
ed to the dLAN network by an additional dLAN
adapter.
If AutoPlay is active on your computer, the in-
stallation will start automatically. Otherwise,
open the directory with the Windows Explor-
er by right-clicking on Start (or the Win-
dows logo) and selecting Explorer from the
context menu. Then start the installation wiz-
ard manually.
During the installation process, you will be giv-
en the choice of installing all software components
(Standard installation) or selecting individual ones
(Custom installation).
To take full advantage of the functions of
your device, we recommend installing all of
the applications.
devolo dLAN TV SAT Receiver Kit
Initial use 23