Devolo dLAN Manual page 18

Fig. 4
Operating status display
b
Lights up green
dLAN TV SAT to IP Receiver is operational.
b
Lights up red
dLAN TV SAT to IP Receiver is in stand-by mode or
switched off.
The dLAN TV SAT to IP Receiver complies with current
EU power-consumer directives and includes a stand-by
mode for lower power consumption (power-saving
mode). A few seconds after you switch off the
dLAN TV SAT to IP Receiver, the device changes to
PowerSave mode by default and the display goes
blank.
If power-saving mode is disabled, the time is shown on
the display when the dLAN TV SAT to IP Receiver is
when the
switched off.
when the Once the device is in power-saving mode, it takes a few
seconds to restart.
If you go in the menu to Settings Con-
figuration PowerSave mode , you can
disable the standby mode with low
power consumption. To save on energy
costs, we recommend leaving power-
saving mode active.
Initial use 17
devolo dLAN TV SAT Receiver Kit