Frequently Asked Questions - iRobot Roomba 500 Series Owner's Manual

Frequently Asked Questions

When caught on items such as carpet tassels or wires, the Side Brush
may spin slowly or briefly spin backwards to free itself. This may also
occur on thick or high-pile carpets. If this behavior should occur on hard
floor surfaces or when no tassels or wires are present, the Side Brush
the screw from the center of the Side Brush. Next remove the Side Brush
and thoroughly clean any hair or debris that is wrapped around the shaft.
Then reinstall the Side Brush and Side Brush screw.
When Roomba's brushes encounter items such as carpet tassels or wires,
the brushes will briefly reverse direction to get free. This action causes
a thumping sound that can be heard approximately once per second
until the brushes are free from obstruction. If Roomba makes a thumping
sound when no tassels or wires are present, the main brushes should be
cleaned.
other obstacles, allowing it to slow down and gently touch the obstacle
with its bumper before changing direction. Roomba may be less effective
at sensing and slowing down for extremely dark or black surfaces, or for
objects that are less than two inches wide.
TIP: For additional assistance, visit www.irobot.com/support.
For more detailed information, visit: www.irobot.com 33