Description of the Appliance, 9 Overall View Start-up and Use, 10-13 Practical advise on using the burners B 40 L EC.1 SF Precautions and Tips, 14 General Safety Disposal Maintenance and Care, 15 ...
Gas Hob Operating Instructions Installation ! Before operating your new appliance please read Data Label - The Data Label is located on the this instruction booklet carefully. It contains underside of the appliance. A duplicate label is important information for safe use, installation and supplied to adhere in an accessible area adjacent care of the appliance.
Gas Hob Operating Instructions Installation Built-in hobs to be slotted in (see fig. 2, Make sure you take all the necessary precautions detail H1). In this case it is necessary to to guarantee proper installation in compliance with make a hole in the worktop whose the applicable regulations.
Page 4
Gas Hob Operating Instructions N.B.: If the appliance is installed above an oven, a wooden panel must be fitted underneath the hob as insulation. It should be fixed at least 20 mm away from the hob casing. The appliance must be fitted to the kitchen cabinets using suitable fixing accessories (these are provided) which may vary according to the type of installation required and the proportions of the appliance Page 4 of 16...
Gas Hob Operating Instructions Electrical Connection The hobs come equipped with a 3 pin plug and power cable. The plug and power cable comply with Australian requirements. Please check the power rating, voltage and frequency indicated on the data plate (located on the bottom of the hob as well as on the front cover of this manual).
Page 6
Gas Hob Operating Instructions Adapting to various types of gas Warning: Servicing should be carried out only by authorised personnel. To adapt the hob to a different type of gas other than the default type (indicated by the label placed on the upper part of the hob or on the packaging), the burner nozzles should be replaced as follows: Remove the hob grids and slide the...
Page 7
Gas Hob Operating Instructions Repeat the process until the minimum SAFETY TIMES FOR EACH BURNER: level is high enough. To save the minimum level setting for the burner, as The safety time when the appliance is switched off soon as it has been adjusted press the (the interval between the flame being switched off corresponding + and –...
Page 8
Gas Hob Operating Instructions Scholtes Models: B 40 L EC.1 SF Natural Gas ULPG Gas Appr. No: GSCS20141 1.0kPa 2.75kPa Injector By-pass* MJ/h Injector By-pass* MJ/h Rapid 1.29 Closed Semi Rapid 0.64 Closed Closed Total 23.2 22.2 220-240V AC 50/60Hz 0.6W Made in EU * By-pass setting on natural gas is adjusted and displayed electronically.
Gas Hob Operating Instructions Description of the appliance Overall View GAS BURNERS differ in size and power. Use the diameter of the cookware to choose the • most appropriate burner to cook with. Control Knobs for GAS BURNERS adjust the power or the size of the flame. •...
Gas Hob Operating Instructions Start-up and use LEGEND: FUNCTION BUTTONS AND DISPLAY D 1 = LOCK ENABLED INDICATOR WINDOWS D 2 = COOKING TIMER AND SET TYPE OF GAS INDICATOR T 1 = ON/OFF D 3 = POWER LEVEL INDICATOR (FROM 0 T 2 = KEYPAD LOCK TO 9 = 10 POWER LEVELS + 0), T 3 = - BUTTON USED TO SET TIMER AND...
Page 11
Gas Hob Operating Instructions THE FIRST TIME THE HOB IS CONNECTED TO • In some cases the non-ignition of a THE ELECTRICITY MAINS, THE KEYPAD WILL burner may be due to air which has BE LOCKED, AS IS THE CASE EVERY TIME become trapped in the gas piping.
Page 12
Gas Hob Operating Instructions BURNER Pan diameter (cm) To select and set this option: • Press button T3; windows D3, 4, 5 and 6 • A. Auxiliary 6-14 flash alternately, displaying the symbol “t” and window D2 displays the figure “99” B.
Page 13
Gas Hob Operating Instructions When the appliance is not being used, • make sure that it is switched off (the burner displays are switched off, or showing “H” if the burner is still hot). We also recommend that the main valve •...
Gas Hob Operating Instructions Precautions and tips ! This appliance has been designed and Do not use unstable or deformed pans. • manufactured in compliance with international Remove any liquid from the lid before • safety standards. The following warnings are opening it.
Gas Hob Operating Instructions Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance ! Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair.
Gas Hob Operating Instructions Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.